Outlaw Audio 1070 User Manual download pdf (Page 6)

Outlaw Audio

Owner’s Manual



Dolby Virtual Speaker

Creates a surround-sound effect when only two speakers are connected.



Lip Sync Delay

This important feature allows you to compensate for the video delay that

is often caused by the scaling circuitry in ﬂat panel and micro-display

based video displays, digital video recorders or digital video sources.

Independently adjustable for each input, this feature restores lip sync.



Four-Way Crossover

Allows you to optimize bass reproduction and power handling by setting

different crossover frequencies for front, center, side surround, and rear

surround speakers. (Don’t worry about understanding all of this right

now – we’ll explain later. Trust us, we’re Outlaws!)



RS-232 Port

An RS-232 port makes it possible to update the Model 1070’s software

right from your computer.



Low-Voltage Trigger

This output jack sends a signal to an external system component (ampli-

ﬁer, video projector, etc.) so that it turns on whenever you turn the Model

1070 on. Yes, it’ll turn those same things off when you put the Model 1070

into standby mode, too, so don’t worry.

Unpacking

Your receiver comes in a carton with packing materials designed to cushion it

from all the rudeness it’ll undoubtedly encounter during shipping. We strongly

suggest you save them for use if you move, or if the unit ever needs to be shipped

back to us for any reason (our warranty requires it).

OK, your hideout may be small but you can minimize the size of the carton for

storage. Flatten it by carefully opening the top and bottom ﬂaps and folding the

carton ﬂat. Do the same with other cardboard inserts. If some of the packing

material can’t be folded, save it in a plastic bag.

The Model 1070 is not light. It can’t be with all those goodies stuffed inside.

So take care when you lift it. Use your legs, not your back! And don’t bash

your furniture with the protruding front-panel volume control knob or the

rear-panel connectors.

Accessories

After unpacking your Model 1070, please check to make sure that the follow-

ing accessories are in the box. If the Outlaws in the factory left anything out,

please get in touch with us.



1 Remote control



2 AA Batteries for the remote control



1 AC power cord



1 FM antenna



1 AM loop antenna



2 Front panel input insert covers



1 Owner's manual

Model 1070 Front Panel

FP1 On/Standby Indicator LED (see pages 26, 37)

Glows amber when the unit is in standby (ready) mode and turns blue

when you turn the unit on.

FP2 IR (Infrared) Sensor (see page 42)

The IR sensor receives commands from the hand held remote control.

Don’t block or hide it. If the Model 1070 is placed in a closet, cabinet, or

behind tinted glass doors, you may have to use an external IR sensor.

FP3 Front panel display (see page 12)

Shows the input you’ve selected, what it’s assigned to, the AM or FM fre-

quency and tuner preset (if any), volume level, mute, which channels are

active, etc. It may be set to turn off automatically from 15 to 60 seconds

after it shows the information and may be used instead of the on-screen

display to help set up the Model 1070 and the rest of your system.

FP4 Cursor (Navigation) controls

In general, the Up and Down cursor buttons select a particular function

or parameter from the on-screen or front panel display menu while the

Left and Right cursor buttons adjust whatever function or parameter

you’ve just selected. The Enter/Set button (in the middle of the Cursor

buttons) locks in the adjustments you’ve just made.

FP5 Menu button (see page 26)

Activates or cancels the on-screen menu.

FP6 Input button (see page 38)

Pressing activates input select function. Use the Cursor UP and DOWN

buttons to select the desired input.

FP7 Surround mode button (see page 38)

Pressing activates surround mode select function. Use the Cursor UP and

DOWN buttons to select the desired surround mode.

FP8 Tone button (see page 40)

Activates the tone controls. Use the Cursor UP and DOWN buttons to

select the desired tone control mode.

FP9 Mute button (see page 38)

Mutes the volume of the Model 1070. Pushing the button again, or turn-

ing the volume control, restores the sound.

FP10 Volume knob (see page 38)

Adjusts volume level through your speakers. The front panel display shows

volume settings from –70dB to +10dB. Turning the knob clockwise

increases volume. Turning it counterclockwise decreases levels. Volume

control overrides the Mute circuit.

FP11 Standby/On button (see pages 26, 37)

When the rear panel Master Power switch is in the ON position, pressing

this button toggles the unit from standby (most everything off except for

the IR sensor and associated circuits) to on (fully operational).

FP12 Headphone jack (see page 41)

Use to connect headphones. Pure stereo or Dolby Headphone processing

is available. The speakers are muted when the headphones are in use.

Unpacking

1 2 3 4 5 6 7 8 9 10 11 ... 51 52

Comments to this Manuals

No comments

Outlaw Audio 1070 User Manual Page 6

Comments to this Manuals