Outlaw-audio 970 User Manual download pdf (Page 35)

Model 970 7.1 Channel Preampliﬁer Processor

Owner’s Manual

Sleep

The Model 970’s sleep timer automatically shuts the unit off after a prede-

termined amount of time, from 5 to 90 minutes. The sleep time can also be

activated directly from the SLEEP button on the remote control, using the

Model 970’s front-panel display.

To set the Sleep timer from the on-screen display:

1. From the SYSTEM CONFIG menu, press or to move the cursor

SLEEP.

2. Press the

and buttons on the front panel or remote to select

the desired setting.

The available choices are:

90MIN75MIN60MIN45MIN30MIN20MIN10MIN5MINOFF

Choosing one of the time settings will cause the Model 970 to turn itself

off after selected amount of time.

Choose

OFF

to disengage the sleep timer function

To exit the menu system

Move the cursor to RETURN TO MAIN MENU by using the and

buttons on the front panel or remote.

2. Press SET on the front panel or the remote.

The Main Menu appears.

3. Move the cursor to EXIT by using the and buttons on the front

panel or remote.

4. Press SET on the front panel or the remote.

Your Model 970 is ready for action! The next section of this manual will give

you the information you need to use the Model 970 on a daily basis, as well as

the instructions for programming the remote.

Model 970 Operation

Now that you have completed the initial setup and conﬁguration of the Model

970, you will ﬁnd it easy to operate. Read the following section to learn the basics

of operating the Model 970, as well as a few tips and tricks that will enhance

your enjoyment of your home theater system.

Power

To turn the Model 970 on:

1. Press the MAIN POWER button on the unit’s rear panel until it

latches.

The Standby/On indicator on the front panel will glow amber.

2. Press the STANDBY button on the front panel, or any source button

(such as DVD, VIDEO 1, or CD) on the remote control.

The Standby/On indicator will turn green, and the front-panel display

will illuminate.

If you have previously been using the remote to control

another device, remember that the TNR button must be pressed in order

for the remote to send commands to the Model 970.

To turn the Model 970 off:



Press the STANDBY button on the front panel or the PWR button

on the remote. The Standby/On indicator will turn amber, and the

front-panel display will disappear.

NOTE: The PWR button on the remote is used only to turn the

Model 970 OFF. This makes it possible for the Model 970 to have

separate, discrete commands for “on” and “off” that may be used to

program an optional programmable remote control. Remember, to

turn the Model 970 ON, press any of the source buttons at the

bottom section of the remote.

Direct Operation

In addition to entering settings into the Model 970 using the on-screen menu

system, as described in various sections of this manual, many of the controls

may be changed directly at any time using the remote control or the front-panel

buttons. We will describe how to make these adjustments in this section.

Source Selection

To select a source/input from the remote control:



Press one of the source buttons (DVD, CD, VIDEO 1, etc.) on the

remote control.

This will turn the Model 970 on and select the desired input. Remember

that in order to actually control the selected source device you must

press the appropriate Device Selector Button. These are at the top of the

remote, and are the only buttons on the remote with the lettering in

white on a black background.

The front-panel display will show the selected source. The on-screen

display will also show the selected source unless you have set OSD to

OFF in the Input Conﬁguration menu.

Model 970 Operation

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 47 48

Comments to this Manuals

No comments

Outlaw-audio 970 User Manual Page 35

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Outlaw-audio 970